G.M. EATON REAR DISC BRAKES
|
8 Lug Eaton complete complete rear disc brake conversion kit includes: Brackets, fasteners, short cable extension (connects park brake cable), stainless brake lines, 12 1/2" vented Rotors (Minimum Rotor Thickness 28mm), & New (not rebuilt) Calipers with a parking brake. Kit # 2630EATON+ $689.95
WITHOUT a Parking Brake Kit # 2630EATON- $469.95 Double Caliper Brackets (Click Here) Drum is on the back side of the hub. You have to remove the hub, take the studs out to remove the drum. Fits 16" Single Disc Brake Style Wheels and larger. It will not fit 15" Single Disc Brake Style Wheels or Dual Wheels. Eaton production ended in 1972. 
When ordering your kit with rotors from us, have them upgraded to Dimpled and Slotted for additional cost of $79.95 a pair. Part# DS
Available for most TSM Disc Brakes! Must be ordered at the same time as the rotors. |
Photos shown represent a complete kit with parking brake. Actual product may vary for your application.
To verify you are ordering the correct kit, check this housing to backing plate bolt hole spacing diagram, against your axle housing.
| ||||||
Kit description WITH A Parking Brake:
- Brackets, fasteners, and 12 1/2" vented Rotors Part # Eaton
- New (Not Rebuilt) Calipers with parking brakes Part # 3120
- Short Cable Extension (connects park brake cable) Part # 3111
- Braided Stainless hose 8" Part # 3703-8
Kit description WITHOUT A Parking Brake:
- Brackets, fasteners, and 12 1/2" vented Rotors Part # Eaton
- New (Not Rebuilt) Calipers without parking brakes Part # 3010
- Braided Stainless hose 8" Part # 3702-8
gm, general motor, eaton, 8 lug, rear, disc, brake, conversion, kit,
